3/4 HP Variable Speed Drive Kit Motor Control Pulleys Belt 395-10260 RPM New

Description

Description:
This is a brand new 3/4 HP DC Motor with Solid State Variable Speed Control + (2) Step Pulleys + 3-Rib Belt + Mounting Plate + Hex Keys & Mounting Bolts/Nuts/Washers
.
Please choose between 24", 36", 42" or 48" belt length...
you must email us your size.
Please read the specs completely and carefully to make certain this will work for you:
Note: This drive motor starts at 1425 no-load RPM...it does
NOT
start at zero
When assembled with the (2) step pulleys and belt, this drive runs at 395 to 10,260 RPM depending on belt position
3/4 HP DC brushed type motor
Motor speed range with NO pulleys/belt: 1425 to 2850 No-load RPM
Lowest speed range WITH pulleys/belt: 395 to 790 no-load RPM
Highest speed range WITH pulleys/belt: 5,130 to 10, 260 no-load RPM
Clockwise rotation (facing end of motor shaft)(rotation can be reversed by switching power leads in the control)
Motor can be mounted via (3) 6mm Screws on the motor face in a 2-1/2" (64mm) circle 120 degrees apart
Motor mounting plate has a 5/16" hole and a 5/16" x 1-1/4" long slot that are 5-1/2" apart
The motor shaft is 591" (15mm) diameter x 1-3/8" (35mm) long
The motor shaft is 2-7/16" (62mm) long overall
Motor body is 3-1/8" (79mm) diameter x 7-1/2" (191mm) long
DC Motor control (solid state)
Input power: 120 Volts / 4.5 amps / 1 Ph / 60 Hz
The six steps on the pulley are 16mm, 34mm, 43mm, 50mm, 54mm, and 58mm diameter
The 3-rib belt is 5/16" wide x 24", 30", 36", 42" or 48" long...
Email us your size
Control box measures 6" wide x 4-3/4" tall x 3" deep + projections for switches and cord grips
With safety switch, variable speed control knob, & built-in resettable circuit breaker
Heavy duty 6
ft grounded cord plus 3 ft cord between motor & control
With screws to mount control box
With (3) motor mounting socket head cap screws/washers
With 2 hex keys
Motor produces its best torque in the top half of its speed range
This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 3/4 HP variable speed drive.  This system is brand new but will come in generic packaging.
Please note: We sell a similar 1/2 HP VS Drive kit in our eBay store.
Please study the pictures & description carefully and email with any questions.  Thanks for stopping by.
Safety Note: It is the buyer's responsibility to determine if this high speed motor is suitable for your application, to mount it securely, and to operate it in a safe manner. Failure to do so may cause injury.
Shipping weight is 14-1/2
lbs.