-40%

DC 12V 5A PWM PC CPU Fan Temperature Control Speed Controller Board Alarm Probe

$ 5.27

Availability: 22 in stock
  • Item must be returned within: 30 Days
  • Condition: New
  • Model: Does not apply
  • MPN: Does not apply
  • Brand: HiLetgo
  • Return shipping will be paid by: Seller
  • Power Source: DC
  • Voltage: 12 V
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    DC 12V 5A PWM PC CPU Fan Temperature Control Speed Alarm
    Features:
    Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning).
    Specifications:
    Working voltage:DC12V
    Circuit load capacity: maximum current per output 5A, the bus currents up 9A
    Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON)
    The second channel and the third channel 10% -100%
    (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.)
    Temperature probe parameters: 50K B = 3950
    Thermostat temperature zone error: Error depending on the temperature probe, generally 3-5%
    Stall alarm minimum speed: 700-800 rpm
    Function setting switch Description:
    TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%.
    TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe):
    TP1      TP2     Accelerating temperature     Full speed temperature
    OFF     OFF     35°     45°
    ON     OFF     40°     55°
    OFF     ON     50°     70°
    ON     ON     60°     90°
    When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed.
    BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with sound and light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm!
    Package Includes:
    1 x Speed controller
    1 x Temperature probe
    1 x Buzzle